BSG-100 Full-Automatic People Use Face Mask Forming making Machine
Suitable to Face Mask for protective use or civil use
Main introduce:
This machine was originally a fully automatic line, only considering that the manufacturers who currently purchase mask production lines do not have professional mask production technicians, and the current specifications of the incoming materials are relatively large. As a result, the automatic wire rack movement rates are generally ≤50%. , Which caused a huge loss of capacity and waste of raw materials, so we will most likely produce the faulty transfer link was replaced by manual operation, only two more workers (a total of 5 people) than the fully automatic line, and the maximum capacity at 24 hours can reach 100,000 per day. only USD 7850 needs to be added. can be changed back to the fully automatic line, which can reach a daily production capacity of 80,000 pieces per day! After adopting this compromise scheme to make a quasi-automatic line, the threshold for debugging is reduced. It only requires users to come for two days of training or video learning to be able to debug independently, thereby alleviating the serious shortage of our current debugging staff. It is stated here that the cost of reverting to a fully automatic line at a later stage is deemed to be a contract.
The BSG-100-2 outer ear mask machine can only produce flat masks, and cannot produce masks with three-dimensional
Whether the mask produced by this machine is medical has nothing to do with the machine. As long as the mask is sterilized, the mask produced by this machine can be used as a surgical medical mask.
Common masks:
It is mainly composed of three layers of non-woven fabrics. The inner layer is a common non-woven fabric; the outer layer is a non-woven fabric with a waterproof treatment, which is mainly used to isolate the liquid sprayed by the patient; the middle filter layer is an polypropylene meltblown non-woven fabric treated with electret; After the final production, it is sterilized by ethylene oxide and left for 7 days to volatilize. After being sealed and packed, it is shipped away.
The product features
1. High stability, low failure rate, beautiful and solid without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3, photoelectric (optical fiber) detection of raw materials to avoid errors and reduce waste. This machine is a fully automatic production of folding mask body machine, including automatic raw material delivery; automatic transportation, cutting of the nose bridge strips, mask edge welding, folding, ultrasonic fusion, forming and cutting, etc.
Mechanical characteristics:
1. Automatic tension control of raw materials to ensure balanced raw material tension.
2. Computer program control, high output, good stability and low failure rate.
3, photoelectric detection of raw materials to avoid errors and reduce waste.
4.It can produce one to four layers of mask body.
5. The machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
6. Replacing the mold can produce masks of different sizes and styles.
7, the whole machine adopts aluminum alloy structure, beautiful and sturdy. Mechanically adjustable parts:
The folding part can be adjusted; the pattern of the welding point of the mask body can be specified or designed by the customer; the mask can be mechanically made with 1-3 layers of fabric; the welding strength can be performed.
next step this is face mask packing machine (1 pc/bag or 10pcs/bag) optional
Sample:
Technical Parameter:
Voltage: AC380V, 50HZ / 60H
Yield: 100 pcs / min Qualification rate: 96% Power consumption: 8.5KW
Machine size: 6050 (L) × 3560 (W) × 1450 (H) m m
Suitable to Face Mask for protective use or civil use
Main introduce:
This machine was originally a fully automatic line, only considering that the manufacturers who currently purchase mask production lines do not have professional mask production technicians, and the current specifications of the incoming materials are relatively large. As a result, the automatic wire rack movement rates are generally ≤50%. , Which caused a huge loss of capacity and waste of raw materials, so we will most likely produce the faulty transfer link was replaced by manual operation, only two more workers (a total of 5 people) than the fully automatic line, and the maximum capacity at 24 hours can reach 100,000 per day. only USD 7850 needs to be added. can be changed back to the fully automatic line, which can reach a daily production capacity of 80,000 pieces per day! After adopting this compromise scheme to make a quasi-automatic line, the threshold for debugging is reduced. It only requires users to come for two days of training or video learning to be able to debug independently, thereby alleviating the serious shortage of our current debugging staff. It is stated here that the cost of reverting to a fully automatic line at a later stage is deemed to be a contract.
The BSG-100-2 outer ear mask machine can only produce flat masks, and cannot produce masks with three-dimensional
Whether the mask produced by this machine is medical has nothing to do with the machine. As long as the mask is sterilized, the mask produced by this machine can be used as a surgical medical mask.
Common masks:
It is mainly composed of three layers of non-woven fabrics. The inner layer is a common non-woven fabric; the outer layer is a non-woven fabric with a waterproof treatment, which is mainly used to isolate the liquid sprayed by the patient; the middle filter layer is an polypropylene meltblown non-woven fabric treated with electret; After the final production, it is sterilized by ethylene oxide and left for 7 days to volatilize. After being sealed and packed, it is shipped away.
The product features
1. High stability, low failure rate, beautiful and solid without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3, photoelectric (optical fiber) detection of raw materials to avoid errors and reduce waste. This machine is a fully automatic production of folding mask body machine, including automatic raw material delivery; automatic transportation, cutting of the nose bridge strips, mask edge welding, folding, ultrasonic fusion, forming and cutting, etc.
Mechanical characteristics:
1. Automatic tension control of raw materials to ensure balanced raw material tension.
2. Computer program control, high output, good stability and low failure rate.
3, photoelectric detection of raw materials to avoid errors and reduce waste.
4.It can produce one to four layers of mask body.
5. The machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
6. Replacing the mold can produce masks of different sizes and styles.
7, the whole machine adopts aluminum alloy structure, beautiful and sturdy. Mechanically adjustable parts:
The folding part can be adjusted; the pattern of the welding point of the mask body can be specified or designed by the customer; the mask can be mechanically made with 1-3 layers of fabric; the welding strength can be performed.
next step this is face mask packing machine (1 pc/bag or 10pcs/bag) optional
Sample:
Technical Parameter:
Voltage: AC380V, 50HZ / 60H
Yield: 100 pcs / min Qualification rate: 96% Power consumption: 8.5KW
Machine size: 6050 (L) × 3560 (W) × 1450 (H) m m